Education
B.S. Mechanical Engineering | University of Central Florida
Expected Dec 2027
Undergrad Coursework, Mechanical Engineering | Florida Institute of Technology
2022 – 2024
A.A. General Studies | Eastern Florida State College
2018 – 2021
Experience
Maintenance Manager Intern | Amazon
Summer 2026
Temple Terrace, FL
- Designed and engineered a SLAM line conveyor guard rail system that reduced package drops by 47% on the prototype line, exceeding the expected 33% improvement.
- Performed mechanical analysis of components and assemblies to select an optimal aluminum extrusion profile, meeting all deflection and safety requirements without mid-span support.
- Analyzed operational data across 9 SLAM lines to quantify the facility-wide impact, identifying an estimated ~$22,000/year in costs from DEA misses caused by package drops.
- Evaluated 8 design concepts through a weighted decision matrix, assessing mechanical performance, serviceability, and durability to select the highest-performing solution.
- Built a custom configuration tool to automate guard rail design for any conveyor length, generating panel layouts, drill guides, BOM with cost estimates, and downloadable 3D-printable STL files.
- Achieved full project payback in ~38 days at $198 material cost; projected facility-wide ROI of ~$22,000/year savings against ~$5,346 total rollout cost.
- Managed the full project lifecycle from initial concept through mechanism design, prototyping, fabrication, and installation to final handoff; delivered an engineering report and presentation to senior leadership.
Tire Technician | Sam's Club
2022 – 2024, 2025 – 2026
Melbourne & Cocoa, FL
- Evaluated tire and battery conditions across 15+ vehicles daily, diagnosing wear patterns and recommending targeted service solutions.
- Maintained compliance with safety protocols and quality standards while meeting daily service quotas in a high-volume environment.
Surveying Intern | Brevard County Public Works
Summer 2019
Melbourne, FL
- Collected elevation and site measurement data using optical levels and grade rods to support public infrastructure planning and construction.
Skills
Software: SolidWorks, MATLAB, Slicer Software (Cura/ChiTuBox/Creality Print)
Fabrication: FDM 3D Printing, Resin (SLA) 3D Printing, Prototyping
Engineering: Statics & Dynamics, Strength of Materials, Kinematics, Structural Analysis, Deflection & FOS Calculations, Weighted Decision Matrices, Iterative Design, Audio Mechatronics
Other: Data-Driven Decision Making, Technical Report Writing, Configuration Tool Development